Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3
  • Image 4

Vibration PU Gel dampener - 20mmx100mmx36mm - self adhesive for Camera

$8.99
Shipping Weight:
133.00 Grams
Stock Remaining:
20


Product Description

These are 100mmx36mm @20mm thickness pads of special PU Gel (Polyurethane Gel Elastomers) CarbonBird brand - designed to isolate high frequency vibration from CMOS cameras such as APSC or larger - can be cut small with a blde to GoProHeroHD2 .  PU Gel is very sticky and self adhesive - peel-n-stick-once material ; in some applications also requires compression of 1g to work well, such as an elastic retaining band if stored sideways - ie If subjected to periods of tension (pulling) or shear force it can come unstuck.  However it can also be washed in fresh water and allowed to air-dry to regain its adhesive properties.

Has a drastic effect at reducing rolling shutter Gello or jelly effect found in CMOS cameras

 

Features

  • Very good vibration Isolation of high frequencies typical in multicopters/RC Helicopters -  when used in compression - for objects up to 1000 grams .  In some cases less is more - a distribution of smaller cut pieces will have a bigger effect at reducing the transmission of vibration
  • 20mm thickness consistent
  • Due to the extreme gell qualities the exact dimension vary by 5-20% (except thickness ±5%)
  • self adhesive - water washable
  • suitable for DSLR or APSC cameras
  • Can be cut to size with sharp scissors before removing protective cover or a razor blade
  • 72g
Includes
  • 1 x pad 100x36mm @ 20mm thickness 
  • 1 x protective film bag - peel once - dispose

Excludes

  • Must be used in conjunction with full Prop balancing and motor balancing techniques 
  • Does not turn a shake-master noob vibration platform into a silk carpet by magic - ! 
  • No not drill - the drill will bind to the gel and pull the gel INTO the hole permanently damaging the gel and possibly breaking the drill bit
  • Excludes rubber band or elastic band to apply compression - this is not required if the surfaces are well prepared and 1g (gravity) is maintained

Application 

  • Surface must be FLAT ; free of protrusions or bumps, dirt, moisture,chemicals, oil, finger marks, other adhesives
  • Peel-n-stick to a FLAT surface 
  • Apply pressure for 1min - apply 2g for 24 hrs (rubber band) to cure
  • Keep under storage conditions of 1g (gravity) 
  • clean with water ONLY - NO chemicals !

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion