Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
  • Image 6

Vibration PU Gel dampener - PAIR - 20mmx30x20mm - self adhesive for Camera

$5.99
Shipping Weight:
60.00 Grams
Stock Remaining:
18


Product Description

These are a PAIR of 30mmx20mm @20mm thickness pads of special PU Gel (Polyurethane Gel Elastomers) CarbonBird brand - designed to isolate high frequency vibration from CMOS cameras such as GoProHeroHD2 without the underwater housing .  PU Gel is self adhesive - peel-n-stick-once material ; in some applications also requires compression of 1g to work well, such as an elastic retaining band if stored sideways - ie If subjected to periods of tension (pulling) or shear force it can come unstuck.  However it can also be washed in fresh water and allowed to air-dry to regain its adhesive properties.

Has a major effect at reducing vibration Gello in HD Video - see application below


Features

  • Very good vibration Isolation of high frequencies typical in multicopters/RC Helicopters -  in compression - for objects up to 250grams 
  • 20mm thickness
  • self adhesive - water washable
  • suitable for GoPro HeroHD or can be used in groups for larger applications
  • Can be cut to size with sharp scissors before removing protective cover
  • 12g
Includes
  • 2 x pads   20x20x30mm  (note size varies by up to 20% due to the extreme Gell nature of the substance
  • 1 x protective film - peel once - dispose

Excludes

  • Must be used in conjunction with full Prop balancing and motor balancing techniques 
  • Does not turn a shake-master noob vibration platform into a silk carpet by magic - ! 
  • No not drill - the drill will bind to the gel and pull the gel INTO the hole permanently damaging the gel 
  • Excludes rubber band or elastic band to apply compression - this is not required if the surfaces are well prepared and 1g is maintained

Application 

  • Surface must be FLAT ; free of protrusions or bumps, dirt, moisture,chemicals, oil, finger marks, other adhesives
  • Peel-n-stick to a FLAT surface 
  • Apply pressure for 1min - apply 2g for 24 hrs (rubber band) to cure
  • Keep under storage conditions of 1g (gravity) 
  • use water only - Do NOT use any chemicals

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion