Loading... Please wait...
Click the image above to see a larger version
  • tricopter Servo+tray (or Avatar) - mini coreless CB215 Metal gear - with Scarab bracket
  • tricopter Servo+tray (or Avatar) - mini coreless CB215 Metal gear - with Scarab bracket

Servo mini +tray for Tricopter / Avatar - fast coreless CB215 Metal gear - with Scarab bracket

$27.95
Shipping Weight:
95.00 Grams
Stock Remaining:
19


Product Description

These are the silver 23mm L digital servos for  SCARAB™ tricopter or Scarab Avatar - comes pre-installed into the carbon Scarab bracket(included)  - they are high speed powerful digital - coreless servos - fast 0.07 secs at 4.8v - with metal gears , and dual BB - pre-fitted into the 2.0mm Carbon fibre frame tray - make sure you use a C1 CAP (see below)

Tested to be 100% compatible with the default PARIS servo rates ( be sure that your PIDs "I" for yaw is set to zero (0) - for selectable working Freq set 1520us and 333Hz

 

CarbonBird CB215 MG servo Features

Small compact design for Tricopter / Avatar- fast - digital - come pre-fitted into the 2.0mm Carbon fibre frame tray 

  • Torque At 4.8V 2.5 kg-cm  
  • Torque At 6V 3.1 kg-cm  
  • Speed At 4.8V 0.07 sec / 60° @ No Load
  • Speed At 6V 0.06 sec / 60° @ No Load
  • Operating Voltage Range 4.8V ~ 7.4V ( 4 ~ 5 Cell Ni-MH)
  • Control System - Digital 
  • Dead Bend Width 0.003ms (2us)
  • Ball Bearing Dual (2 BB)
  • Metal Gears
  • Motor Type Coreless Motor
  • Working Frequency 1520us   333Hz
  • PWM range = 800us-2200us
  • Horn / Gear metal-Spline 25 Teeth 5mmØ (Same as HiTec/KST spline)
  • Dimension (mm) 23 x 12 x 27.5 mm 
  • Weight (gram) 19.5g 
  • Wires - silicon 210mm servo lead

 

Includes

  1. 1 x CB215MG Metal Gear coreless high speed servo ;comes  pre-mounted in the SCARAB servo tray CF as shown
  2. 1 x M3 screw (to mount the horn)
  3. 3 x nylon servo arms (one 4 way horn and one 2 way horn and 1 single arm horn) spline is 5mmØHitec type 25T

Excludes / Requires

  • Requires at least 3 amps uBEC here
  • Requires at least one C1 Cap HERE - usually one is added to the Rx and one is added to the PARIS flight controller
  • Excludes M3*12 long mount screws to attach to the TriiKopta sold HERE
  • Excludes ball joints 
  • Excludes rod ends

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion