Loading... Please wait...
Click the image above to see a larger version
  • Carbon Tricopter SCARAB v3 Delrin™ - Electronica - Triikopta with central Roll Gimbal for all GoPro
  • tricopter - strong CarbonBird motors - wires embedded and hidden inside the booms
  • tricopter - strong CarbonBird motors - wires embedded and hidden inside the booms
  • Tricopter - Fly any GoPro safely - inside it's case
  • Carbon Delrin™  - Tricopter with Roll Gimbal for all GoPro
  • Carbon SCARAB TriiKopta v3 Delrin™ - Electronica - Tricopter with Roll Gimbal for all GoPro
  • Carbon SCARAB TriiKopta v3 Delrin™ - Electronica - Tricopter with Roll Gimbal for all GoPro
  • Image 8
  • Carbon SCARAB Tricopter MultiWii  v3 Delrin™  - Tricopter with Roll Gimbal for all GoPro
  • Carbon SCARAB TriiKopta v3 Delrin™ - CleanFlight - Tricopter with Roll Gimbal for all GoPro
  • RC Tricopter with Roll Gimbal for all GoPro
  • Carbon SCARAB TriiKopta v3 Delrin™ - Electronica - Tricopter with Roll Gimbal for all GoPro
  • Carbon SCARAB TriiKopta v3 Delrin™ - Electronica - Tricopter with Roll Gimbal for all GoPro
  • Carbon SCARAB TriiKopta v3 Delrin™ - Electronica - Tricopter with Roll Gimbal for all GoPro
  • Carbon SCARAB TriiKopta v3 Delrin™ - Electronica - Tricopter with Roll Gimbal for all GoPro
  • Tricopter clear dome
  • Tricopter Carbon frame

Tricopter Carbon SCARAB TriiKopta v3 Delrin™ - Electronica - with Roll Gimbal for GoPro

$269.00
Shipping Weight:
970.00 Grams
 
 
 
 
 
 
 
 
 
Stock Remaining:
5


Product Description

Tricopter RC drone with internal servo and camera roll gimbalTricopter - full Carbon - by SCARAB Australia ; The Scarab, a black aviator thought by the Egyptians to have rolled the sun across the sky. The V3 Delrin SCARAB Carbon Tricopter is the best Tricopter money can buy with 2 embedded digital servos in the frame core, including tail & gimbal roll. This is an ARF kit with the latest PARIS AIR board INCLUDED (GPS option) -  a full rotating tailboom and GoPro Hero gimbal mount included -  Beautiful strong Carbon - Triikopta -  it requires simple assembly (no soldering)  - INCLUDES electronics, hi-end servo gimbal, Tail servo , red CB motors and flight controller.  buzzy-little-Quads are ubiquitous now and yet few pilots realise that the Quieter Scarab Triikopta is superior in every way.  Tricopter does not vary engine speed for yaw, and flies in an extremely smooth, quiet and fast manner.  Scarab Triikopta fans realise well, that this distinctive Scarab Tri machine can capture extremely smooth video/photos on a budget - now includes the 8-Balls video gello killer 

 

FlyPixUK making movies flying his TriiKopta FPV Scarab - TriiKoptas are faster and more stable than quads

 

FilmMaker CrazyJ - California USA - Maiden flight of his Scarab TRiiKopta (above) in strong winds - Paris Sirius board -

This pilot has advanced RC skills - CrazyJ has RC experience = confidence = control.  

It is a good demonstration of the ability of the TriiKopta to deliver amazing results and even do aerobatics with a GoPro Hero safely on board

 

TriiKopta flown by filmMaker FlyPixUK - using a ScarabTriiKopta with Scarab Roll gimbal active (above)

 

TriiKopta with Scarab roll axis gimbal

(above) Triikopta flight test of the prototype with PARIS Sirius IMU - Super stable - hands free 

 

Includes

  • 1 x PARIS Sirius™AIR USB autopilot - Tricopter pre-programmed - pre-calibrated by us - Plug and Play autopilot (requires Transmitter calibration first - (full instructions included) - Works with ANY 6Ch Tx/Rx 
  • 1 x 8-Balls video gello killer - get smooth gello free video 
  • 1 x 8-Balls Servo offset bracket (effective from 14 Sept 2015)
  • 1 x GPS 45° mount bracket (effective from 14 Sept 2015)
  • 3 x 12mm Carbon booms 260mm 12/10   - tail bearings are pre-installed onto carbon boom (tailboom)
  • 2 x 2mm Full Carbon 3K 90° weave decks with latest removable inner section in upper deck (some photos above, some out of date) 
  • 1 x Clear dome (carbonbird logo) new from 10.7.2015
  • 2 x v2 adjustable boom holders with grub screw (front booms)
  • 1 x v2 rotating boom mount in Delrin™ (tail rotor)
  • 1 x v2 rotating roll servo gimbal mount in Delrin™ (GoProHeroHD2 mount)
  • 3 x v2 engine locks - black anodised CNC
  • 4 x Custom SCARAB Carbon landing gear Insect style legs curved
  • 4 x Props 1060 triples CW (x2) and CCW(x2) suitable for 4s Ops  (Actually very easy to balance using sticky tape - not included)
  • 3 x New CarbonBird® R15 Motors wound for 4S - 888kv - normal shaft
  • 1 x Andromeda v2.1 LED board - Pilot orientation board with dual 12v FPV regulators - super bright daylight/sun friendly Red/White and Blue LEDs indicate the front.sides and rear - can be seen from 250m
  • 4 x 6mm nylon standoffs for Andromeda
  • M2 stainless steel bolts, nylon bolts and nuts - see photo at right
  • 2 x Servo pitch change Rod - ball end - balls
  • 2 x CF servo mounting plate 23mm slot size
  • 3 x 18amp Carbonbird ESCs 
  • 1 x HW ESC programming card
  • 2 x digital metal gear servos - CB215MG - FAST 0.07sec 60° - twice as fast as older BMS210 - tested and flown extensively - perfect compatibility
  • 1 x Servo tester to set mid point for the servos without needing the radio or the PARIS turned on
  • 2 x 3300 uF capacitor - install these to any free pins on RC Rx or AIR - smooths power during servo reversals, prevent brown outs - aply to any free pins on PARIS or Rx
  • 1x 4 way power distribution lead JST ->XT60
  • 140mm circumference Velcro strap for recommend LiPo size (2200-2650Mah 4S)
  • Adhesive Velcro for LiPo positioning
  • 3 x Zip-tie ropes for ESCs
  • 1 x SCARAB Pro frame tool Wiha 1.57mm (1/16th ") - German toolsteel - Allen wrench
  • 1 x Holographic blade tape - for prop safety
  • Noobs guide -  ENGLISH building guide PDF written by a Grade 1 Flight Instructor Helicopters  - User manual - Download it here
Excludes
  • Requires Assembly (no soldering) - Peer support on the inline threads RCG Scarab forum and recently the more popular FB SCARAB SOCIAL CLUB here as it has instant FB functionality when replies are made etc
  • If ordering a PARISv5r3(excluded)  - comes with Std LEDs but excludes the top end Andromeda v3r3 here
  • Excludes GPS and GPS mounting bracket HERE
  • Excludes Radio control Tx/Rx ;Recommend Taranis on this site - see RC
  • Excludes 5.8ghz FPV kit
  • Excludes LiPo main power cell ; Recommend 4S2250 45c ; 
  • Excludes LiPo Charger ; Recommend iCharger ; We have tested heaps of B grade chargers - these ichargers are the only chargers on the market we actually recommend 100% - amazing balance charge and cell balancing
  • Excludes a temperature controlled soldering iron - Hakko 888
  • Excludes uBEC if required is HERE
  • Requires Advanced problem solving mental skills - NOT suited to people who dont enjoy the fun of solving a puzzle - why? becuase you must understand the electronics in the drone, to build well.
  • Excludes training - See "Questions below  - Training is free on YouTube - Google "YouTube Scarab Tricopter".  See Our Tech FAQ HERE
  • recommend yo DOWNLOAD THE INSTRUCTIONS before buying and make up your own mind if you understand everything, or not.
  •  
 
 
Question - My old Ball links -> balls now have play in them - How do I solve ball-link play?
Answer by team pilot "Q" - servo balls and ball-links used are Align brand  - respected brand in the helicopter world  - the way Ball-Links work is that they have an open and a closed side (one side is bigger and has a thin marker line) - each time the rod end goes over the ball the plastic stretches - so they are best installed once at room temp 25°C.  If they are accidentally popped over the balls backwards; or installed in cold temps 5°C they stretch too much and don't recover introducing "play".  They are a consumable part and its a good idea to keep spares. The proper technique to remove them use using a ball-link tool  Of course once they are over-stretched - the way to fix and remove ALL play is with a drop of cyno:
1) with the Ball Link fitted onto the ball and the correct 90° angles used in flight
2) place a drop of THIN cyno onto/into the loose joint ( it will wick inside by itself instantly
3) spay accelerant ; or leave the cyno overnight
4) crack the joint (cyno cannot stick to the ball) ; apply hand force and it will suddenly move
5) ALL play will be gone
 
Question - my new ball links are too tight?  When new the ball links can be quickly "seated" by first clipping the rod end over the steel ball - then heating the nylon gently/slowly with a heat gun at 90°C- this allows the nylon to expand when hot 
 
Question - How do i reverse the Servo gyro response of the tricopter gyro for the Tail Rotor? In the RC Tx? Answer =  No, gyro not done in Tx - so actually the servo gyro response direction is reversed in the MultiWiiConf UI "Servo tab"- see fully tutorial HERE
 
 
 
 
This product ships FAST by AUPosteParcel - to Australia - For EU, DE  or USA we offer very Low DHL express shipping fees (add to cart to see estimate) - that are very FAST , so DHL in 3 days to USA
 
Delrin™ is a registered trademark of DuPont Corp USA
 
 
 

 


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion