New for 2013 - Removeable Centre-section TOP plate - Easy boom changes or boom installation when travelling !!! - instant access to all wires on the Voltair or ESC's and motor wires - undo 4 M3*5 screws - access all areas of the Scarab without the need for a stripdown !
SCARAB Quad/Octa 175mm Aerial photography airframe frame plate - Top Plate -> used in pairs - can be combined with older bottom plates to upgrade/convert a small 100mm SCARAB Armour or Reconn to a full-house aerial photography airframe - and still use all of your existing SCARAB hardware investment - it can be configured as a large super-ridged AP Quad with 4 x 66g 775kv Carbonbird motors on 4S 9050 props ; or as an Octa 8 x 29g Carbonbird 1220 kv motors on 8x4.5 - compatible with our SCARAB 12mm boom based products.
Shipping is by Fedex/DHL only - any order with this CF part by Airmail will be cancelled and refunded only. signature/Tracked orders only
All Carbon fibre is machine cut and may have slight scratches and sharp edges - these can be finished with a few minutes and a diamond file used for finger care - NOTE : these are real 100% 3K 90° CF fabric weave all the way through - not fake heli veneer carbon you see on many helicopter frames which claim to be Carbon but only have a veneer!! Becuase the Centre section is bigger than the outer section it has to be cut from a separate sheet - hence the reason its slight more expensive than a lower deck.