FREE Shipping worldwide*  - limited time offer - 

This is the NEW FPV QUAD STEALTH RECONN ( BYO FPV Gear version for Pilots who have their own FPV camera, Transmitter/Receiver/Voltage Reg/high-gain-CloverLeaf Antennas x 2  - NOT INCLUDED) - the Full VERSION ELECTRONICA is on this LINK here - that all the Pro-Pilots are raving about -  Yes we have had this airframe in the hands of our Pro-Pilots fro 2 months under going real-world event filming -  ARF Electronica - The reconnaissance version - The idea being a small and  quite quad with the Full 1080p GoProHeroHD2 outfront - clear of props in the HD FOV - and the battery offset to the rear to keep the CofG centred.   The lens recommended is also the 2.8mm factory fitted for the best FOV for judging depth and height on FPV - The Stealth is a total package and the motors/ESC/Props and and Airframe are the perfect combination - add PARIS Sirius IMU control system = Hero ship.  The main difference between RECONN and ARMOUR versions is the wattage output of the motors and the mission weight.  Armour is a lighter ship 700g with smaller motors - Reconn sits at 1kg and runs the bigger 775kv motors at a high voltage and wattage. 

Note: Props do not appear in the Video if the GoPro mount ≥ 115mm is used (this movie was shot on a shortened GoPromount)

Hero Features

• Short booms and good stability with the PARIS 600 twin gyro, Acc , MAG and BARO
• Composite CNC aluminium and Carbon fibre construction
• Long flight times - 8-11mins depending on LiPo - must be 4S
• Good stability in all indoor or outdoor conditions
• Designed to Carry a payload = GoProHeroHD2 video/still camera
• Quite - When operating the stealth outdoors - its so quite people dont even know its there - 5 Star neighbourhood rating - perfect for night flying or public parks
• Small size for transport to work  :)  - 320x320mm - so it will fit in a box 320x320x250mm - props off.  Everything else on and ready to fly.
• Weight fully assembled with  - 920g WITHOUT LiPo main cell
• Weight fully assembled with Rx, PARIs , similar FPV gear to these photos(this is the BYO FPV gear version- so FPV gear is not included in this version), GoPro and GoPro housing  - Recommended LiPo  = 1075g

Includes

• PARIS Sirius 600 IMU - flight control board with FTDi USB - legendary Aerial Photography class of HD video stability that made PARIS the best selling MultiWiiCopter controller worldwide - works with any brand of RC Radio PPM

• 8 x 12mm tubular booms - 150mm long aluminium

• Motors -  4 x CarbonBird® 775kva motors - 59g with NMB high end bearings and long wires installed
• Prop Adapters - 4 x Red/Silver Prop adapters 3.17mm/5mm shaft
• Props - 8x4.5 tough props CW and CCW (plus 2 spares) = total 6 props
• ESC - 4 x mighty 10Amp HobbyWing® ESC - these ESCs are the same ones we use n our Hexii - Dont be fooled into over-sizing your ESC - The nature of multicopters is such that is prudent to use the CORRECT size ESC and not an oversized ESC
• ESC Program card
• Airframe - CNC 2mm 100% Carbon fibre plates with hardpoints precut for addition GoPro holder to added down the track when you are ready fro them
• 1.5mm Carbon fibre battery tray - If not flying the GoProHDv2 - then the battery can be moved to the belly point and the flight time will be extended for pure FPV style practce runs - prior to the main shoot.
• CNC boomholders - RED anodised
• CNC engine holders coolers - Red anodised
• Andromeda Pilot orientation board - Red/White and Blue LEDs indicate the front.sides and rear - day or night
• 4 x CarbonFiber curved landing gear - see photos
• Various M2 and M3 bolts
• Nylon standoffs fro mounting th PARIS board and the Andomeda LED board
• 140mm circumference Velcro strap for recommend LiPo size (1800-2650Mah 4S)
• Adhesive Velcro for LiPo postioning
• 4 x Zip-tie ropes
• 1 x 1.57mm (1/16th ") Scarab Pro tool - for tightening the boom holders in pairs - Wiha - German toolsteel
• FPV Gear - NOT INCLUDED THIS VERSION - see FULL FPV version this link  - 

Requires/Excludes

• Requires assembly - this is not a TOY - Requires the ability to use tools skillfully and patiently - total assembly and testing time = approx 3-5 hours
• Requires PC skills - to get the full benefit you need to be able to use your PC or MAC well - install USB drivers - Read Forums - Read the Wiki - become part of the Scarab online forum
• Requires prop balancing - Props and motors can be balanced to run silky smooth by the owner - this is an important skill you must learn - its easy - but takes 3-10 mins per prop to do well - its a matter of adding blade tape to balance the props when running at speed - trial and error process called dynamic balancing - props are spun up and balanced while turning/spinning.  Pilots who say they did not balance their props are just short changing themselves - The entire IMU will fly better and the bearings will last longer when everything is balanced dynamicaly - Use the Forums and YouTube to search for Prop balancing videos.  AP requires very smooth props for smooth video.
• Excludes Radio control Tx/Rx ;Recommend Futaba 7C or Turnigy er9x(see gearlist page this site)  or HiTec Aurora 9.  For future upgradability choose a radio with a removeable RF module in the back like Futaba 10CAP(eBay)  or Turnigy 9x.
• Excludes LiPo main power cell ; Recommend 4S1600 40c shorter fligths; get 3 or 4 of these amazing zippy LiPos - Also works with 4S1600 40c  4S2200 40C  for Longer flights
• Excludes GoProHeroHDv2 camera - Highly recommended - massive improvement in sharpness over the v1
• This VERSION kit - Excludes 5.8Ghz Transmitter & Receiver, plus CarbonBird FPV Camera ONLY - Custom 3 bladed Tx antenna - 4 Bladed Rx antenna - 1.5km ultimate range - 750m safe Ops Radius LOS - Some countries mandate shorter distances equating to the pilot visually seeing the aircraft. 5.8Ghz Ch1 -Ch8 -  (1)5705;(2)5685;(3)5665;(4)5645;(5)5885;(6)5905;(7)5925;(8)5945 - Specify PAL(50fps) or NTSC(60fps)
• Excludes your FPV Ground-station 7" or 9" LCD monitor and Googles - see the Gearlist Page - scroll down to FPV
• Requires a FPV 12v regulator to supply consistent power - regardless of the voltage of the 4S LiPo - We recommend these LF120ABV!
• Excludes LiPo Charger ; Recommend iCharger ; We have tested heaps of B grade chargers - these ichargers are the only chargers on the market we actually recommend SAFE -100% - amazing balance charge and cell balancing - This is what happened to a customer who risked using another brand of charger without proper LiPo safety monitoring systems in the charger such as accurate cell balance and without thermal cutof protection and without a fire-proof bag.  Used correctly, attended -  LiPos are safe - used incorrectly they will burn at 700°C.
• Exclude Quanum telemetry for individual cell monitoring - total voltage has caused the loss of many aircraft because it is primitive and archaic - You MUST know in real-time when the first cell dives below 3.4v - only Quanum can do this
• Requires soldering skills - Excludes a temperature controlled soldering iron - Hakko 888
• Requires RC Pilot Skills - Excludes flight SIM here
•