includes FREE SHIPPING* - WORLDWIDE by Fedex/DHL - see below

The worlds strongest creature by size is the Scarab beetle, thought by the Egyptians to have rolled the sun across the sky. The v2 YSiixKopta (HEXACopter) is a powerful 6 engined multicopter with a max lift of 1.8kg (6 CarbonBird 775 motors on 4S and 9050 props and a 4S2650 40C LiPo) and a realistic AP payload of 750grams including the gimbal - designed to carry the latest APS-C mirrorless cameras on the integrated front roll -gimbal - and CNC camera tray - Ideal for Nex5N or Panasonic GH2 or Nikon V1 - As supplied (no payload) it will hover at 1/3 throttle easily !!  We are commercial photographers / FPVpilots ourselves and we live to make our airframes efficient and stable for photography. This Aircraft flies normally on 5 engines - so one complete engine or prop or ESc can fail and still save your camera gear. Full Carbon Electronica version -  it requires assembly - Ysiix requires advanced model assembly skills - soldering skills - prop balancing skills - INCLUDES electronics, gimbal, servos and engines.  Has the properties of a strong CENTRAL carbon CORE - with three decks - PARIS electronic is mounted on a TOP-DECK - slender booms & light weight mounts have been designed to reduce airflow drag and tested to improve stability and give LONG flight times.  Central to the design is the idea that it has to be strong but light weight ; aerodynamically clean and efficient with low drag under the propeller wash zone ; The front booms can be rotated/offset forward by small increments to provide positive-offset-thrust lines rather than the poor yaw control associated with rectangular boom frames.  This ELECTRONICA VERSION features magnetic HEADING HOLD for stable video and a full roll gimbal for level horizons in all video footage up to 40° bank.  This is critical for Aerial photography where a tilted horizon can render footage un-usable.  Gimbal control is via dedicated gimbal IMU.  The gimbal Tray is 2mm CNC aluminium and can either carry an APS-C sized camera on top or a HD video camera underslung. The Tray can - if required carry a GoProHeroHD2 for longer endurance flights - GoPro underwater housing shaft/adapter included.

YSiixKopta being flown by Film-maker Tretch5000 - Nick uses both the standard v1GoPro lens and the Sunex 2.8 lens on a 2nd v1GoPro to record this vision 

SCARAB YSiix v2 Electronica ARF - Features

1. Six engine reliability - can continue to fly in full control with one engine/esc/prop failed - aka single engine redundancy
2. 120° film-making propeller spacing - no props in your shots -  Includes our GoPro mount as shown here (GoPro available separately)
3. Strong 150mm diameter central core - 2mm 3K twill 90° weave FULL carbon - 3 layer decks (included)
4. 3 Slender removable tubular CF booms (included)  - these are special 12/10mm 6 layer full carbon booms - 2 sets
5. 4 x Carbon landing gear stable on any surface - full reflex - insect styling - carbon 3K weave (included)
6. Designed for our own 65g brushless motors 775kv CarbonBird® motors on 4S  (included ) these come with 310mm wires included 20AWG
7. Designed for the 9050 triple blade props specifically (12 included)
8. Designed for 6 * 18Amp CarbonBird ESC - made by legendary HobbyWing® with new ultraFast SIL F334 CPU(included) This tiny ESCs together have a combined output of 132amps for 10 secs!
9. New v2 Delrin™ Boom holders  - Positive yaw control.  The rotor tilt mechanism is pre-built in being able to tilt the motors in minor increments - powerful yaw correction - v2 Grub screw positive lock
10. Wires installed internally - less aerodynamic drag - long flight times (no primitive box section matrix to create wasted energy and drag)
11. New V2 engine locks - composite structure with light weight 3mm CF Carbon Fibre engine mounts - Co-axial (included)
12. New v2 Delrin™ Roll gimbal - metal gear servo included -intergrated into the airframe - this gimbal is hardcore metal on metal with oversized bearings and Metal Gear servo selected by us after lengthy trials for the least gear play and compatibility with the software.
13. Stable in wind - Can be flown indoors or outdoors in high wind.  YSiix is revered by pilots who own them - the co-axial engines provide zero gyroscopic precession forces because they cancel each other out.
14. PC and Mac compatible tuning - Radio Tx and PARIS tuning via USB - requires PC skills to load drivers and JAVA
15. Flight simulator available this website - NOT included
16. Optimised for AP/FPV SCARAB YSiixKopta - Capable of aerobatics the YSiix is actually super stable
17. Standard 660mm diameter between opposite engine centres - 570mm Triangular separation
18. Airframe 540 grams - excluding engines/electronics/LiPo cell
19. 4 x CF Landing Gear is pre-drilled.  
20. Weight - Carbon YSiixkopta SCARAB 12 typical weight with engines and all electronics in 965grams (CarbonBird® engines) plus the recommended 4SLiPo battery weight is 350-430g on top of that.   LiPo (not included) Recommend 4S4200 45-90c 
21. Recommended props are - 4S 9050 Triples (included) -  These super light high RPM props are so safe because they are soft plastic and represent a NON-lethal alternative to dangerous TREX style aerial camera solutions.
22. RoHS lead free 
23. Fully tested by experienced RC MultiwiiCopter pilots and film makers - see video this site
24. Designed and manufactured by us after real work flight tests - here in AUSTRALIA at MulticopterPilot.com.  Not available on any other website.
25. Andromeda LED orientation board with FPV 12v regulator included in PCB

YSiixKopta ARF Electronica Includes

• 4 x 12/10mm Carbon booms 280mm (1 x spare YSiix specific CF booms) - spare booms on our site in 12/10mm are 300mm and will need to be trimmed shorter by the user - or ordered trimmed with a note to us on what you need.
• 2 x 2mm Full Carbon 3K 90° weave decks (2 large 150mm)
• 1 x Metal Gear Servo (for gimbal)
• 1 x Servo tester to set 1500uSEC centre position
• 1 x Metal CNC APS-C sized camera tray with SS 1/4" tripod bolt.
• 3 x V2 12mm Dupont Delrin™ boom holders (black)
• 3 x Full Carbon engine co-axial 3mm  mounts 
• 3 x V2 Engine locks/coolers (red)4 x Custom SCARAB Full Carbon landing gear -  Insect style legs curved

• 8 x Props 9050 CW (x6) and CCW(x6) suitable for 4s Ops on 750va Carbonbird motors - specifically
• 6 x CarbonBird® 775kva NMB motors (no x spare motor) - Feature 310mm wires and NMB USA bearings
• 6 x prop adapters (1 spare)
• 6 x CarbonBird® 18Amp ESC (22 amp peak for 10 secs) these operate at 5amps in a normal YSiix - but the extra amp rating allows user to run larger props at a later date if they upgrade to a bigger APC camera.
• 1 x Carbon Fiber Battery tray
• 1 x Optical camera Dome - pre-cut rear slot for Wiring access
• Gimbal mount Dupont Delrin™ (choice of both gimbal shafts GoPro Housing and APSC tray mounts)
• 1 x HobbyWing ESC program card
• 4 x 10mm; 4 x 15mm ; 4 x 6mm - nylon stand-offs for upper electronics layering
• 1 x SCARAB Pro Frame tool 1/16th inch - 1.5875mm - Wiha - German Toolsteel
• M2 and M3 stainless steel bolts, nylon bolts and nuts - various including spares
• Gold Plated Electrical JST connectors - proper top quality connectors
• 140mm circumference Velcro strap for recommend LiPo size (2200-3650Mah 4S 40C )
• Adhesive Velcro for LiPo postioning
• 6 x Zip-tie ropes
• 1 x 1.57mm (1/16th ") Allen wrench L keys for tightening the boom holders in pairs - Wiha - German toolsteel
• 2 x Holographic blade safety tape
• Instructions - Download the Noobs guide for all basic SCARAB Noob setup training - printed YSiix instructions supplied - a photo-guide for experts/experienced builders in post noob phase