Loading... Please wait...
Click the image above to see a larger version
  • Scarab Knife 200 - FPV Racer - Full Carbon - naked airframe kit
  • Scarab Knife 200 - FPV Racer - Full Carbon - naked airframe kit
  • Scarab Knife 200 - FPV Racer - Full Carbon - naked airframe kit
  • Shown fitted with MWC Aussie AIR HERO•32 flight controller  (not included) - best option
  • Shown fitted with Naze r6 (not included)

Scarab Knife 200 - FPV Racer - Full Carbon - frame kit - naked with PDB/LED/GoPro Mount

$64.00
Shipping Weight:
200.00 Grams
 
 
 
 
 
 
 
Stock Remaining:
14


Product Description

 

the DIY version - naked Carbon airframe with a FREE v3 Hi-Vis LED + 50a PDB, kit - for you to Add your own electronics to the amazing Aussie Scarab Knife 200 Racer here - designed/flown/made in Australia - FPV Pilots will need to choose/add their own motors / ESC / Props and flight controller etc - the airframe is compact and tough and perfect for through the woods obstacle flying on FPV

The Knife 200 is designed around the Sony HS1177 FPV Camera and 4" props - for a 4s1250 LiPo - however in this DIY version these items are not included

 

Includes

  • 3mm Booms x 2 (front/rear) full Carbon Fibre (motor mounts are 19mmØ ; 12mmØ
  • 2mm Full CF weave Upper plate
  • 2mm Full Carbon Fibre Weave Lower Deck
  • 2mm HD isolated upper deck for GoPro/Yi - with tilt mechanism included - includes 4 White Gell Balls
  • Front and Rear mid deck FR4 1mm for Rx and FPV Tx mounting - 6 x 15mm mid-deck mount posts
  • 6 x CNC Red standoffs M3
  • includes Mini-Andromeda 50a PDB - Includes XT60 ( if you need the HP version option upgrade of the PDB select it at top right) ; 50a has 4 HiVis sunlight Blue LED ; 4 HiVis full sunlight Red rear LED ; 500ma 5v reg ; 12v Reg ; FrSky compatible A2 voltage divider for A2 frsky Telemetry
  • M3*8 x 8 SS button head bolts
  • M3*6 x 12 SSbutton head bolts
  • M2*6 x 12 ss button head bolts
  • 8 x M3 Black standoffs nylon
  • 4 x M3 Nylon nuts 
  • 4 x M3 bolts nylon (Flight controller mounting 30.5mm centres

Excludes / Requires

  • excludes - Designed for HS1177 Sony FPV camera here
  • excludes HP upgraded v4 PDB unless added by user at extra cost above - HP is only required if you are going to exceed 50 amps or 500ma on the DC rails
  • excludes FPV Tx and connectors here  - designed for 200mw Tx here
  • excludes motors - recommended >3000kv 18g 2203 motors here ; or 2205 race motors here
  • excludes ESC - recommended LittleBee ESC 20 amp here
  • excludes RC Rx - recommend FrSky X4R here
  • excludes LiPo - recommend 4s1250 here
  • excludes requires assembly - see Full version instructions/guidelines/page here

 

 


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion