Loading... Please wait...
Click the image above to see a larger version
  • RC Prop Adapter  and spinner RED - 3 Leaves 3.17mm / 6mm prop shaft AU NZ
  • RC Prop Adapter  and spinner RED - 3 Leaves 3.17mm / 6mm prop shaft AU NZ
  • RC Prop Adapter  and spinner RED - 3 Leaves 3.17mm / 6mm prop shaft AU NZ
  • RC Prop Adapter  and spinner RED - 3 Leaves 3.17mm / 6mm prop shaft AU NZ
  • RC Prop Adapter  and spinner RED - 3 Leaves 3.17mm / 6mm prop shaft AU NZ

Prop Adapter 3Leaves 3.17mm / 6mm prop shaft - Carbonbird motor part

$2.25
Shipping Weight:
25.00 Grams
Stock Remaining:
27


Product Description

These are our OEM 6mm - 3.17mm CarbonBird™ Prop adapters featuring 3 bladed leaves to grip the shaft - like a three legged stool these adapters grip evenly - With Multicopters it's critical to have a 100% perfect straight/true collet shaft to ensure the prop is rotating dead-centre.  In the event of impact the CarbonBird™ motor shaft will usually fail at the machined failpoint (small groove machined into the shaft) but if the shaft is reversed then these force can be absorbed by the Collet (this item) and it may be off centre - and is best replaced.  This new version with 6mm Shaft is substantially stronger and resists bending in a crash.

 

Dimension & Data

  • Weight 8.4grams
  • OEM Carbonbird™ aluminium collet = silver
  • fits motor shaft 1/8th"  ID 3.17mm
  • OD 5.97mm
  • OD M6 threaded shaft 28mm L ; threaded section 13mm
  • Suit props of ≥ 7mm depth - otherwise you will need to add another washer which is NOT included
  • Collet features 3 blades/petals

 

Instructions

  1. To fit - first crimp the 3 pettles by hand together - so the + gap is almost gone  - then apply a small amount of loctite to the motor shaft - then push onto a 1/8" shaft
  2. Grip the Motor Bell; the prop hub with your fingers of your left hand
  3. use a 3mm hex tool - passed thru the Spinner - apply force equally to both sides - tighten with your right hand
  4. Check that the collet is binding to the motor shaft fully - VERY IMPORTANT - apply 3 kg force to see if you can pull it free?

 

Includes

  • Prop adapter Shaft 6.0mm - fits a motor shaft 1/8th" 3.17mm (note the PA is made of 4 parts the Collet(silver) ; the Collar (red) ; the washer (red) ; the spinner (red)
  • Prop adapter pinch ring
  • Washer 15/5 - red
  • Spinner 16/12 - Red - spinner has 3.0mm hole for tightening

 

Excludes

Excludes Props

Excludes optional 8/6mm adapter ring used on Graupner Props HERE 

 

Shipping - Does not fit into the maximum width dimensions of a $3 envelope - must be included with a "package" sized order - ordered with other things - any order attempting to add 1 or 2 of these prop adapters by airmail envelope $3 - will be cancelled and refunded because it does NOT fit inside an envelpe for airmail with the appropriate packaging protection - simple - sorry

 

*NOTE : Its possible to bend an aluminium collet straight by first spinning it - marking the side which is running wide with a permanent ink marker - then bending it away from the mark by the same amount - be aware that metal fatigues oif bent back too many times and may fail.

NOTE : 2 - if the washer is slightly off centre - don't panic - use this to your advanatage to balance a prop which has a lateral imbalance - ie - sit flat across the balancer.


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion