dji props for Phantom 3 or late model Phantom 2 - these 9450 props have embedded CW/CCW threaded nuts and can only be used on dji motors with the match CW or CCW threads (excludes many first gen phantoms) - these props are 9" called 9450 - they are generation 2 - steeper pitch - and are only suitable for the gen 2 motors phantom dji motors. if running these on lder phantoms be sure to check motors dont go thermal.
Important note - Phantom 3 - the Phantom 3 used active braking ESC and its VERY important to tighten these props VERY TIGHT - failure to do so may cause them to loosen in flight
Warnng - these props must be tightened to full torque of the thumb and forefinger whilst holding the motor bell - any sudden stoppage or crash can result in the prop becoming loose - do not fly immediately - first you MUST re-tighten the prop and inspect it. If a prop is impacted in a crash it MUST be discarded and replaced - never fly with a previously crashed prop as it represents a risk of in-flight failure.
also Fits Phantom 1.1.1 if the prop nuts are marked silver/black
balancincing - these props are balanced - but to ge absolute perfect "gello free" videos - you still need a decicated prop balancer HERE