Loading... Please wait...
Click the image above to see a larger version
  • little bee - Carbon Bee ESC 20a OPTO silabs BLHeli DIY mini quads - Australia
  • little bee - Carbon Bee ESC 20a OPTO silabs BLHeli DIY mini quads - Australia  - the program stick is sold separately (not included)
  • little bee - Carbon Bee ESC 20a OPTO silabs BLHeli DIY mini quads - Australia - in BLHeli use firmware for Little Bee if updating in future - ships with BLHeli 14.3
  • ships with BLHeli 14.3

littlebee - CarbonBee ESC 20a OPTO silabs BLHeli mini quads Multishot - Australia

$14.75
Shipping Weight:
35.00 Grams
Rating:
Stock Remaining:
40


Product Description

the little bee CarbonBee 20a opto esc is diy Silabs BLHeli ESC for mini Quads and racers - has very strong active braking (uses more amps to do this) and a fast CPU by Silabs Little Bee ESC Opto 20a Australia CarbonBee

these are supplied programmed with BLHeli 14.4 for Carbonbird motors - Fully MULTIShot coded by MWC  - 100% compatible/ready

 

Includes

  • 1 x Carbon Bee ESC 20a opto - tinned wires (ESC wire 120mm / motor 3 phase 80mm / DC 100mm)
  • Includes BLHeli bootloader - allows changes to coding via Chrome/CleanFlight interface
  • Includes BLHeli 14.4 MULTISHOT coded software pre-installed for Knife

 

Excludes / Requires

  • Requires soldering by DIY - use AMTECH 223 flux paste - not included
  • Excludes program STICK - sold HERE (or use BF) TIP / - BLHeli - select Silabs - Option (C) USB/COM - then connect the ESc and power the ESC - PORT = FVT 
  • Excludes reverse voltage protection - if the ESC is shorted or reverse polarity it will be smoked - take care

TIP / HACK if you wish to solder the motor wires direct to the ESC - make 2 cuts 10mm down each SIDE of the heat shrink - peel back ; solder ; then fold down again - there is no need to remove the heatshrink entirely

This is an original product by CarbonBird - 100% compatible with FVT little bee (if mixing it) 

 

Question - How do i reverse a motor direction after i soldered all the wires up on my CarbonBee 20a ESC?  For ESC with full BLHeli bootloader - The latest CleanFLight software 1.1.0 is intergrated with latest BLHeli 14.3.0.1 to allow pilots to select ESCs one-by-one and alter their setting thru the Chrome CF interface UI - see below - PROPS OFF ! - however the Pololu (if fitted) will need to be disconnected initially as Pololu does not have a reversed diode to prevent early start - then connected again just before connecting the BLHeli UI - here the settings

4xesc-access-cf-usb-hero32.jpg

carbonbird-carbonbee-esc-motor3-directions-test.jpg

 

 


Write your own product review

Product Reviews

  1. CB Littlebees rule

    Posted by Ward Paterson on 5th Mar 2016

    Awesome ESC's. Highly recommended





Currency conversion