Loading... Please wait...
Click the image above to see a larger version
  • KDS eBar v2 - high end Helicopter Flybarless Sbus - AU NZ
  • KDS eBar v2 - high end Helicopter Flybarless Sbus - AU NZ
  • KDS eBar v2 - high end Helicopter Flybarless Sbus - AU NZ
  • KDS eBar v2 - high end Helicopter Flybarless Sbus - AU NZ
  • KDS eBar v2 instruction manual pg01
  • KDS eBar v2 instruction manual pg02
  • KDS eBar v2 instruction manual pg03
  • KDS eBar v2 instruction manual pg04
  • KDS eBar v2 instruction manual pg05
  • KDS eBar v2 instruction manual pg06
  • KDS eBar v2 instruction manual pg07
  • KDS eBar v2 instruction manual pg08
  • KDS eBar v2 instruction manual pg09

KDS eBar v2 - high end Helicopter Flybarless Sbus with LCD setup

$79.00
Shipping Weight:
220.00 Grams
Stock Remaining:
4


Product Description

High end KDS Ebar v2 IMU 3 axis flybarless controller , with Sbus (or DSM2) and piro comp - the real deal flight controller for 250, 450, 500, 600, 700 and 800 sized RC Aerial Photography Helicopters.  A beautifully made and well respected KDS CNC metal controller the eBar for FPV pilots wanting to try an RC hel.   we recommend a 600 or 700 size with lower head speed - as a first heli (read all safety and PPE guidelines first and seek training at a Club) as these are actually more stable than a small 250 or 450.  This eBar gives you the stability you have come to expect from a Scarab Knife or Reconn - making flying a real helicopter a 100% pilot control experience.  We use these ourselves - and recommend them

 

Features

 

  • Metal CNC IMU design with inertial mass to handle RC Heli vibration
  • Full plug-n-tune LCD panel programmer - (no laptop needed at the flying field) 
  • Sbus Input for FrSky Rx such as X4R , X8R
  • HV capable DC 4.8v -> 9.0v
  • small size 39mm x 29mm x 14mm
  • 21.5g (the weight of the case is a design feature and cannot be compared to thin plastic case IMU's which cannot resist those difficult to eliminate vibration in larger 500-800 copters as the KDS can )

Includes

  • 1 x KDS eBar v2 system IMU Controller (Red)
  • 1 x KDS PPC (LCD programmer tool)
  • 1 x data line (connect eBar to LCD for setup)
  • 1 x tail servo line RC plug/wire
  • 1 x Sbus RC wire
  • 2 x gyro mount tape
  • 1 x printed instruction manual  - you can also download the eBar v2 instruction manual above in images section (top of this page - click for larger view)

 digital servos are commonly desired/used - but the eBAR can be set to "analogue" servos for smaller cheaper helicopters too 

Excludes/Requires

  • All RC helicopters require balancing skills - we recommend to static and dynamically balance the tail, Head and all blades
  • Excludes governor - most ESC have this function now using BLHeli software
  • Excludes training - join a Club or hire an instructor to guide you thru your first 20 hours airborne - Warning RC helicopters represent a leath risk to un-trained persons

 

-  DO NOT INSTALL main or tail rotor blades unless you totally 100% understand the eBar flybarless control system and governor FIRST   

 

 

 

 


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion