Loading... Please wait...
Click the image above to see a larger version
  • FPV Camera NTSC - HS1177 - Sony Super HAD II - 2.8mm lens AUS
  • FPV Camera NTSC - HS1177 - Sony Super HAD II - 2.8mm lens Australia AU
  • optional OSD cable (not included - sold separately) FPV Camera NTSC - HS1177 - Sony Super HAD II - 2.8mm lens
  • FPV Camera NTSC - HS1177 - effective 14 April 2016 - the wires now exit at the top side for FPV tilt
  • FPV Camera NTSC - HS1177 - Sony Super HAD II - 2.8mm lens Australia AU  - Instructions
  • FPV Camera NTSC - HS1177 - Sony Super HAD II - 2.8mm lens Australia AU  - Instructions

FPV Camera NTSC - HS1177 CarbonBird - Sony Super HAD II - 2.8mm lens - 26mm

$34.00
Shipping Weight:
95.00 Grams
Stock Remaining:
12


Product Description

this CarbonBird "HS1177" FPV camera 12.7g - Australian Stock - ships* overnight - with a 2.8mm glass lens you get 105° Field-of-View (FOV Horizontal) which is perfect for FPV -  very well regarded the key feature is its "works for FPV out the box" whilst being very light plastic cased - with

Effective 14April2016 the wires exit at the TOP on the rear to allow easier access for FPV tilt

The CarbonBird 1177 very well regarded the key feature is its "works 100% FPV hero cam, out the box" whilst being very light plastic cased - with good shadows sensitivity  details (normally shadow areas are blacked out in trees etc) visible . If you need to push it further, Easily Fine tuned with the OPTIONAL plug-n-play INLINE OSD controller - with our custom cable you disconnect the camera and insert the in-line joystick OSD controller to the camera line cable (other store will give you a cable you cannot use) - then make any adjustment for conditions - SAVE - then remove the cable/joystick and fly.  Gives the advantages of customisation (including even adding your own callsign (for racing) and where it is shown, on the screen) 

HS1177 Sony FPV camera plastic case 12g version NTSC Australia

don't be discouraged by the low low price - this camera really kicks some FPV goals ! try one ....

HS1177 Features - 12.7g FPV Cam

  • Image Sensor 1/3" SONY Super HAD CCD II - Genuine SONY CCD chip
  • + Shadow digital signal process with + 5dB gain in shadows
  • OSD tuning with optional plug-n-play joystick
  • Horizontal Resolution 600 TVLine
  • Excellent True Colour - Minimum Illumination F2 glass lens
  • Number of Pixels  NTSC :811(H) x 508(V) 410K
  • Scanning System NTSC: 525 Lines, 60 Field/Sec
  • Dawn to Dusk - YES ;; for Night Street Ops - 0.01 lux BW - this is good for well lit carparks - ;; alternately For "Pitch Black Ops" choose this IR camera HERE
  • Video output 1v p-p 75 Ohms
  • Audio output no
  • Built-In Glass Lens 2.8mm  105° FOV
  • Power Consumption DC 9V-13V, 150mA-50mA    stabilised 12v DC preferred i.e. Andromeda 12v output is perfect (can be run 3S without a regulated 12v supply)
  • Operation Temperature -10℃ ~ + 50℃, RH 95% Max
  • Storage Temperature -20℃ ~ + 60℃, RH 95% Max
  • Housing Black - plastic 26mm :)
  • Weather Resistant - no 
  • Dimension 26x26mm out size of plastic case 
  • FCC ; CE ; RoHS and C-Tick approved camera
  • Voltage 12v(3s) or 16.8v(4s) - no issues at all - guaranteed OK for 4s - Tested by MWC team - (as opposed to dodgy hs1177m which all failed ppffft)

Our Recommended settings for the HS1177 CAM from the MWC Team FPV pilots for Ops -

Camera comes ready for FPV - plug and FLY -  already PRE-SET ; 3s or 4s

SETUP -> LENS -> MANUAL - BRIGHTNESS 60
SETUP -> EXPOSURE -> SHUTTER AUTO / AGC HIGH / DWRD ON ; LEVEL 055
SETUP -> WHITE BAL. -> MANUAL / TEMP MANUAL BLUE 066 ; RED 072
SETUP -> BACKLIGHT OFF
SETUP -> DAY&NIGHT -> COLOUR
SETUP -> DPC ->DPC VIEW  OFF
SETUP -> SPECIAL -> CAM TITLE ON
SETUP -> SPECIAL -> IMAGE ADJ. -> LENS SHAD. OFF / 2DNR ON 010 / MIRROR OFF / FONT COLOUR RED / CONTRAST 130 /SHARPNESS 012 /DISPLAY LCD ; GAMMA 0.50 - PED 044 - COLOUR GAIN 057 / NEG IMAGE OFF / RETURN RET / RETURN RET
SETUP -> EXIT -> SAVE

 

Includes

  • 1 x HS1177 FPV Sony super HAD-II CCD  Camera - CarbonBird™ 2.8mm lens 105° lens horizontal FOV - NTSC version
  • Steel Swivel mount with screws  - ±25° - effective height gain =7mm (lower hole only used if facing 90°)
  • 300mm plug-n-play 3-pins Video cable - only 1.5g !  -  Red/black/yellow (no mic -  not USED)

Instructions see above photos section for instructions


Excludes

NOTES : works well with vsync for OSD on v5r3 osd1.3 - OSD sketch config.h line 106    #define USE_VSYNC 
Cameras suits DRY conditions - LENS requires storage with no humidity - best to store camera lenses and electronics in air-conditioned environments.
Mount the camera back from the very front, to protect it from impact - beginners flat - advanced flyers tilt up 20°
 Normal use excludes crash damage; short circuit ; over voltage(Max 4s LiPo ; reverse polarity connection and flood
 
SHIPPING
These cameras require SIGNATURE DELIVERY 

 

 


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion