Loading... Please wait...
Click the image above to see a larger version
  • HQProp Durable 5x4.6x3Y CW/CCW - Black - 4 props AU NZ Australia
  • HQProp Durable 5x4.6x3Y CW/CCW - Black - 4 props USA

HQProp AU Durable 5x4.6x3B CW/CCW - Black - 4 props

$3.99
Shipping Weight:
95.00 Grams
Stock Remaining:
17


Product Description

HQ Prop AU new DURABLE 5x4.6x3" props (June 2016) 0546 HQProp DP 5x4.6x3B -  2xCW(R)  + 2xCCW(standard) BLACK miniquad racing FPV props.  These are specifically matched to  Scarab Knife 240 -  They require no balancing - They are EXTRA tough and quite.  

Features

  1. SUPER STRONG - Durable ABS plastic
  2. light weight 4.3grams/ prop - perfect for rapid speed changes - required to stabilise multiwiicopters
  3. Suits 2400kv - or F40 on 4S - CarbonBird® motors with 5mm hub
  4. 5mm ID Ø bore  
  5. Requires 7.3mm shaft height ; 5mm Ø diameter shaft to mount it.
  6. require almost no balancing (always check every prop and use 800 grit wet-n-dry to remove any sharp edges at the leading edge of the blades)

Includes

  • includes 4 props 5x4.6" triples as you see in Photo 1 at top right - BLACK - 2*CW(R) and 2*CCW = total 4

Excludes

We recommend to always check Balancing - These HQProps are near perfect as supplied (true centres) - they require almost no balancing, if any at all - However you must check each and every prop yourself - BEFORE FLYING - on a balancer - we found none in 4 set needed balance - but its up to the user to check and if necessary balance for HD Video
Limitations - Do not exceed the max RPM 29,500 - replace any prop if damaged or crashed - You must understand the risk of flying a Quad with a damaged prop can result in the Multicopter crashing/falling and hurting a 3rd party or yourself - YOU WILL BE RESPONSIBLE for this !  - props can cut - keep away from eyes!  wear safety glasses ALWAYS !
 
 
•Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.  PROPS can CUT ! take precautions !  Never fly closer than 30m to/from any person or pet
 
 
Question - Can it use this prop on other motors - ?
Check the diameter of your motor shaft is 5mm and the depth between the spinner and the base <7mm or less - then you can pop them straight on.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion