Loading... Please wait...
Click the image above to see a larger version
  • HQ Prop Set 4"x4.5, CW/CCW - orange 0445 - 2 props
  • Image 2

HQ Prop Set 4"x4.5, CW/CCW - orange 0445 - 2 props

$1.99
Shipping Weight:
20.00 Grams
Stock Remaining:
12


Product Description

These are the new HQ Prop 4x4.5" high RPM props (Aug 2015) 0635 -  one sets (ORANGE)CW(R)  + CCW(standard) low pitched multicopter props.  These are specifically matched to 3100kv CarbonBird motors on 3S on Scarab Knife 190 mini - 4x4.5 for good all round endurance.  amazingly -  They require no balancing - They are tough and quite.  The colour versions (ORANGE this listing)  are normally flown at the back to give an aircraft front/back reference in line of sight LOS 

Features

  1. SUPER Quiet - STEALTH Prop - suitable for indoor or urban Ops
  2. Normal Pitch = High efficienccy for longer flights , hovering ops  
  3. Strong ABS plastic
  4. Super light weight 1.8grams/ prop - perfect for rapid speed changes - required to stabilise multiwiicopters
  5. Suits 3100kv - 3S - CarbonBird® motors with 5mm hub
  6. 5mm ID Ø bore  
  7. Requires 6mm shaft height ; 5mm diameter shaft to mount it.
  8. These are high quality props for a great low price - made by HQ Prop - have passed all our MultiWiicopter tests - but you must adhere to safety warnings about props below - always.
  9. require almost no balancing (always check every prop and use 800 grit wet-n-dry to remove any sharp edges at the leading edge of the blades)

Trust data

TBA

Includes

  • 2 props 4x4.5" as you see in Photo 1 at top right - ORANGE - CW(R) and CCW

Excludes

We recommend to always check Balancing - These HQProps are near perfect as supplied (true centres) - they require almost no balancing, if any at all - However you must check each and every prop yourself - BEFORE FLYING - on a balancer - we found none in 4 set needed balance - but its up to the user to check and if necessary balance for HD Video
Limitations - Do not exceed the max RPM 19,500 - replace any prop if damaged or crashed - You must understand the risk of flying a Quad with a damaged prop can result in the Multicopter crashing/falling and hurting a 3rd party or yourself - YOU WILL BE RESPONSIBLE for this !  - props can cut - keep away from eyes!  wear safety glasses ALWAYS !
 
 
•Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.  PROPS can CUT ! take precautions !  Never fly closer than 30m to/from any person or pet
 
 
Question - Can it use this prop on other motors - ?
Check the diameter of your motor shaft is 5mm and the depth between the spinner and the base <7mm or less - then you can pop them straight on.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion