Loading... Please wait...
Click the image above to see a larger version
  • Image 1

Grub Screws 0.05" hex - Qty 4 - fits 2400kv Red/Black series motors

$1.99
Shipping Weight:
26.00 Grams
Maximum Purchase:
10 unit(s)
Stock Remaining:
40


Product Description

Qty of 4 spare CarbonBird™ Motor grub screws 0.05" hex  - spare replacement part - Fits the mini RED/BLACK Series of motors -   including 2400kv    

Features

  • High quality STEEL
  • size - fits the 2400kv shaft

Includes

  • set of 4 grub screws

 

Important Notes

  • imperial 0.05" hex tool required - not included
  • Always heat the motor to 120°C to soften up the loctite first - then use an imperial 0.05" hex allen key
  • Make sure the grub screw is no attracted to the inside of the motor bell.

QUESTION - One of my motors stops before the others on shut down? How can i adjust it?

the shaft depth can be set any time in a few secs - this controls the friction setting - by varying the distance slightly between the circlip end and the grub screws (2)

a slight difference in friction has no real effect on flying - but can be set any time if needed
  1. leave the motor connected to the copter - prop and all
  2. - use a 0.05" hex tool - undo the 2 black grubs 1 turn  CCW - 
  3. loosen the axial play of the bell by 1/1000" (freeplay) - pull the bell slightly out toward the prop 
  4. re-tighten the 2 grub screws.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion