Loading... Please wait...
Click the image above to see a larger version
  • GemFan 5040 5x4x3 BLACK AU Triple blade, 2*CW/2*CCW - set of 4 pros  Austraila NZ  - 2L2R GF Nylon
  • GemFan 5040 5x4x3 BLACK AU Triple blade, 2*CW/2*CCW - set of 4 pros  Austraila NZ - 2L2R GF Nylon
  • GemFan 5040 5x4x3 BLACK AU Triple blade, 2*CW/2*CCW - set of 4 pros  Austraila NZ - 2L2R GF Nylon
  • GemFan 5040 5x4x3 BLACK AU Triple blade, 2*CW/2*CCW - set of 4 pros  Austraila NZ - 2L2R GF Nylon
  • GemFan 5040 5x4x3 BLACK AU Triple blade, 2*CW/2*CCW - set of 4 pros  Austraila NZ - 2L2R GF Nylon
  • GemFan 5040 5x4x3 BLACK AU Triple blade, 2*CW/2*CCW - set of 4 pros  Austraila NZ - 2L2R GF Nylon

GemFan 5040 5x4x3 BLACK AU Triple blade, 2*CW/2*CCW Triblade - set of 4 pros

$3.99
Shipping Weight:
55.00 Grams
Stock Remaining:
36


Product Description

The GemFan v2 triple bladed 5040 5x4x3 props (2L2R GF Nylon) are similar to the HQ but Features a tougher plastic to withstand more "G" forces  gemfan 5040 props set of 4 5x4x3 triple blade

  1. triples Triblade are SMOOTH at high speed runs on HDVideo camera as they are 120° out-of-phase
  2. Quiet - suitable for indoor or urban Ops
  3. Strong ABS plastic  v2 stronger composite
  4. Super light weight 3.5grams/ prop - perfect for rapid speed changes - required to stabilise multiwiicopters
  5. Suits 2300-2400kv - 4S - CarbonBird® motors or T-Motor navigator with 5mm hub - To use these effectively your mini must be less than 550g total with everything on board.
  6. Requires 5.5mm shaft height ; 5mm diameter shaft to mount it.
  7. These are high quality props for a great low price - made by GemFan - have passed all our MultiWiicopter tests - but you must adhere to safety warnings about props below - always.
  8. require almost NO balancing if any (always check every prop and use 800 grit wet-n-dry to remove any sharp edges at the leading edge of the blades)

Includes

  • 4 5x4x3 (v2 series) TRIPLE blade props as you see in Photo above - 2 CW(R) and 2 CCW (TOTAL 4 props)

 

Excludes

Balancing - These are near perfect as supplied (true centres) - they require almost no balancing, if any at all - However you must check each one like the top pilot do,  on a GOOD prop balancer HERE and every prop yourself - BEFORE FLYING - on a balancer - we found none in 4 set needed balance - but its up to the user to check and if necessary balance for HD Video
Limitations - Do not exceed the max RPM 21,500 - replace any prop if damaged or crashed - You must understand the risk of flying a Quad with a damaged/cracked prop can result in the Multicopter crashing/falling and hurting a 3rd party or yourself , possibly damaging your Quad itself - at your own risk  - YOU WILL BE RESPONSIBLE for this !  - props can cut - keep away from eyes!  wear safety glasses ALWAYS !
 
 
•Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible - make sure your actions and your Copter is safe.  PROPS can CUT ! take precautions !  Never fly closer than 30m to/from any person or pet
 
 
Question - Can it use this prop on other motors - ?
Check the diameter of your motor shaft is 5mm and the depth between the spinner and the base <5.5mm or less - then you can pop them straight on.

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion