Loading... Please wait...
Click the image above to see a larger version
  • FrSky TFRSP Rx  Futaba Fasst compatible, CPPM receiver AU NZ - made by FrSky
  • FrSky TFRSP Rx  Futaba Fasst compatible, CPPM receiver AU NZ USA - made by FrSky
  • FrSky TFRSP Rx  Futaba Fasst compatible, CPPM receiver AU NZ - made by FrSky
  • FrSky TFRSP Rx  Futaba Fasst compatible, CPPM receiver AU NZ - made by FrSky

FrSky TFRSP 10Ch Rx Futaba 14SG Fasst compatible, C-PPM drone receiver

$25.95
Shipping Weight:
95.00 Grams
Stock Remaining:
10


Product Description

The FrSky TFRSP can handle 6-8 channels via CPPM and then 2-4 SERVO channels for gimbal ops - very popular for DJI/3DR PixHawk FUTABA 14SG pilots who use Ch 1-7 for the Naza/Wookong/PX4 and then insert Gimbal inputs into pins marked Ch8/9/10 - TFRSP is compatible with the Futaba 14SG  FASST series radios.  The TRFSP is a Full Range Radio Receiver.  This C-PPM (also called PPMSum) is usable for reducing wirings to PARIS Autopilot UAV systems and also has a RSSi (PWM) pin as well - useful for PARIS v5 MegaOSD or PARIS AIR HERO v2 because you can access the first 8 Ch by CPPM single wire - then access channel 9 and Ch 10 for Alexmos gimbal tilt and roll.  Note that ch 1-4 cannot be accessed by traditional servos - only Ch5-10.

Compatibility

Futaba FASST 2.4G Air Systems (on your Futaba 14SG Select 7CH Mode/ or for 10 channels use Futaba MultiMode) Futaba 8 FG, Futaba 14SG

Specifications

  • Number of Channels: up to 10 channels total (CPPM for CH1~CH9, servo signal for CH5~CH10)
  • With RSSI Output
  • DC Operating Voltage Range: 3.5V~10V
  • Operating Temperature Range: -10℃~60℃
  • Dimension: 53mm*30mm*11mm
  • Weight: 13.5g

 NOTE : Servos are not to be plugged into Channel CPPM or Channel RSSI, otherwise servos will get hot or may burn out

Note 2 : For NAZA / Scarab pilots coonect only one 3 pin wire from NAZA x2 -> CPPM pin and select PPM on the NAZA GUI

 

Bind procedure

Turn on the transmitter, connect the battery to the receiver while pressing receiver’s F/S button. When the RED LED goes off and the GREEN LED is solid (normal function lock) , the binding process is completed.

 

Includes - printed instructions

 

Below is one way to use this TFRSP with a PARIS v5 with iOSD built in,  and a Scarab 2 axis brushless gimbal Black and get 8 + 2 channels - including a video switch for 2 cameras on-board the Reconn FPV Video Quad

This video presented by one of our open-source customers - his views are at expert level but do NOT represent the only way to do things or even the right way
open source respects all views and independent thinking, shared.


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion