FrSky Delta 8 Rx features a full line of servo pins for Fixed wing FPV ; or is the perfect PARIS AIR receiver for Futaba fliers with Hero v2 with CPPM (PPMSUM) and also RSSi (for OSD and FPV) - RSSi can only be accessed in PPM SUM mode by placing the Jumper across pins 3->4 - ; or you can use it in traditional 8pins/wires/Ch mode and not use rssi. The Rssi output is Squarewave PWM.
WE have tested these extensively for long range out to 750m with FUTABA 8J and 14SG in S-FHSS mode on Carbon Scarabs doing FPV with all the usual gear running - no problems found - solid lock and 100% failsafe tested by us in the field.
- Hitec Aurora 9 A-FHSS compatible
- Futaba 8J S-FHSS compatible
- Futaba 14SG S-FHSS compatible
- Futaba FHSS compatible
- FrSky V8 & D8 DJT Modules Receiver
features CPPM and RSSI output options if used with CPPM.
- Operating Voltage Range: 3.0V-16V (HV Version)
- Operating Current: 30mA
- Specified Range: 1.5km-2.5km
- Resolution: 3072
- Latency: 22ms
- Number of Channels: 8CH
- Dimensions: 49mm×24.5mm×15 mm
- Weight: 9.3g
FrSky Delta 8 RC Receiver
Printed binding instructions
Excludes wires - these are supplied with PARIS Sirius™ v5 Mega iOSD or PARIS Sirius™ AIR
Binding to Taranis - Paris v5 C-PPM
These Rx work well with Taranis and PARIS v5 Mega iOSD or Airv2
as C-PPM Receivers - to bind create a new model in Taranis - set Internal RF=Mode D8 ; Bind/Enter "bind flashing" - with Rx off place a jumper across pin 3&4 then hold down the F/S button on Delta8 and whilst holding connect a 5v battery to the Rx - wait until you see the red light - release ; on the Tx hit enter - BIND will stop flashing ; power down both and remove the jumper from 3&4 ; restart both Tx and Rx - the Rx display both a green&red led to show its working in range and in C-PPM mode ; connect a 3 pin wire from Pin1 Rx to Pin19 PARIS Sirius™ v5 Mega iOSD.
notice : These Rx are compatible with Hitec Aurora and Futaba SFHSS 8J. However - They are made by FrSky for FrSky users.