Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3

ESC thermal mount UltraSpec rated - 20x17.5x1.5mm set of 4

$7.00
Shipping Weight:
45.00 Grams
Stock Remaining:
41


Product Description

Any ESC will produce heat from the MOSFET side at mid throttle 50% position where the MOSFETS are working hardest - however, ESC with a linear LDO BEC will also shed heat from the BEC side such as the CarbonBird 18a series - this is becuase they reduce 16.8v 4s down to 5.0v for the CPU circuits and heat is created as a by-product of linear voltage regulation reduction - by using our new UltraSpec grade of thermal compound you can dispers heat away to the large surface area of the airframe very quickly and efficiently - PREVENTING to possibility of thermal run away - Its quite normal for one ESC to reach 65°C and stay there (ESC will only shut sown if the temperature runs-away and climbs above 110°C) So using these thermal mount strips on the BEC side you can reduce the operating temp by 15°C - they also have a silicon flex property and "mould" the the shape of ESCs with slightly irregular bottom BEC sides.  This material is vastly superior to the light-weight grey strips in its ability to conduct heat away - near instant heat transfer - each 20x17.5mm sections weighs 2.0g

 

 

Includes

ESC thermal mount UltraSpec rated - 20x17.5x1.5mm  - set of 4 pieces (as per photo)

 

Excludes 

Excludes ZIP-ties 

 

NOTE : it is important to understand that thermal compond is NOT adhesive and the ESC must be mounted firmly against the strip - as shown in the photo - the ZIP-tie should apply pressure to maximise the surface area contact.


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion