Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3

DJI Z15 A7 Zenmuse SONY A7 A7R ,f2.8 35mm Version - camera gimbal Australia

$899.00
Shipping Weight:
4,000.00 Grams
Stock Remaining:
1


Product Description

USD999 ex gst ;    DJI Z15 A7 - for SONY A7 / A7R ƒ2.8 35mm only(excludes camera/lens - gimbal only)  - Australian NZ Film Directors realise the  Sony  A7 16mm lens and image is a cut above INSPIRE or Phantom -   this version for Sony A7 with 35mm fixed focal length lens 

Question - can i use this for a A7R II?  Yes a number of pilots have adapted this gimbal to an A7R II with good results by adding a small amount weight to the lens hood to balance it XYZ and using a lonerg HDMI cable ; moving the IR trigger - google it - not difficult - at your own risk as changes void warranty but offer good results at a big saving.

dji Z15 A7 f2.8 35mm Gimbal Australia - clearance

stock run out - CLEARANCE - 1 only - ships to AU next day - Choose EXPRESS at checkout

 

WARNING gimbals MUST be perfectly balanced XYZ - ALL 3 axis 100% balanced at the time when powered up - YOU must check this - Failure to check balance, adding alternate lenses, lens hoods or jamming motors can lead to motor burn out and jitter and is NOT covered by dji warranty
Do not take-off and land in dust or dirt - all operations should me from grass or use a purpose-use mat to prevent dust ingress to the gimbal - DJI  do not cover damage caused by incorrect use, in the form of dusty take off and landing is at your own risk and NOT covered by warranty
Do not operate in salt laden air or marine environments which can cause accelerated corrosion without doing maintenance to remove and protect from salt - if the gimbal is exposed to salt the user must protect all connectors and PCB with INOX - Users failing to conduct regular maintenance with INOX (or similar sprays) will experience corrosion in marine environments and this is NOT covered by warranty as salt is corrosive .

    dji DOA policy is 7 days - please install and test immediately on arrival - thanks 

 

 

Includes

  1. One x Z15 A7 Zenmuse Gimbal with mounting points for the 155mm 12mm twin rail system of the S900 /s1000 (for Sony NexA7 ƒ2.8 35mm)
  2. One  HDMI video out connector (provision for FPV/Live film feed for the DOP)
  3. Software Updates are - REQUIRES user Firmware matching/update on arrival to match your Flight Controller version - HERE

 

Excludes/Requires

  • Excludes the Sony Camera A7 and excludes the lens 35mm
  • Excludes the Aircraft S900 here
  • Excludes the Flight control system (requires A2 or Wookong)
  • Excludes Video Tx
  • Excludes OSD

 

Specs

General
Built-In Functions
• Three Working Modes

  1. Orientation-locked control
  2. Non orientation-locked control
  3. Back to mid-point (Horizontal mode)

• Built-in independent IMU module
• DJI gimbal special servos drive module
• HDMI-AV module
• Futaba S-Bus receiver support
Electrical & Mechanical Characteristics
Working Current - Static current: 200mA (@25V)
• Dynamic current: 400mA (@25V)
• Locked-rotor current: 4A (@25V)
Operating Temperature -10°C ~ 50°C
Communication Interface CAN (Compatible with ACE&WKM)
Weight 880g (Without UBEC, HDMI-AV module)
Dimensions 200mm × 200mm × 230mm
Frame Dimensions For Camera (Inside) 115mm × 75mm
Working Performance
Load Weight (Reference Value) 392g (@Panasonic GH2)
Angle Control Accuracy ±0.05°
Max Controlled Rotation Speed ±180°/s
Controlled Rotation Range Yaw control: ±360° continuous rotation
Pitch control: ±360° continuous rotation
Roll control: ±40° (±360° mechanic continuous rotation)
Peripheral
Supported Camera

  1. SONY:Nex7
  2. Panasonic:GH2 version is HERE

Input Power 4S~12S LiPo
Control Requirement Four spare receiver channels
Assistant Software System Requirement Windows XP SP3; Windows 7

 

 


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion