Loading... Please wait...
Click the image above to see a larger version
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF Australia NZ USA
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF
  • T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF

T-Motor tiger Prop 5"x3, 1*CW/1*CCW - Boxed set - black CF for 1806

$7.95
Shipping Weight:
125.00 Grams
Stock Remaining:
92


Product Description

USD29.99 - on sale USD7.95 set of 2 - T-Motor (CarbonBird co-branded) 5 x 3" high RPM props -  for 250-275mm mini Quads - 1 x CW(L) and 1 x CCW(R)  low pitched multicopter props.  These are specifically matched to 2300kv Navigator MN1806 motors for 4S1500 ops.  amazingly -  They require NO balancing - They are tough and quiet.  

Features of this prop for TMotor 1806

  1. Full Carbon Prop  - suitable for outdoor Ops - WARNING ! - these CF props are SHARP - user must take EXTRA CARE, carbon props in the wrong hands (yours) can cut and cause serious/permanent eye injuries - WEAR EYE PROTECTION such as polycarbonate sunnies.  On the flip side they cut thru grass and leaves with ease if you encounter such things in your FPV adventures.  Carbon props can shatter if they hit concrete or rocks !
  2. The aerofoil design is efficient and gives long hover times
  3. Super light weight 1.27grams/ prop + 1.1g for screws & top-plate - perfect for rapid speed changes - required to stabilise multiwiicopters
  4. Suits 2300kv - 3S - Navigator MN1806 t-motors /Carbonbird motors - To use these effectively for racing your mini must be less than 500g total with everything on board.
  5. 4mm ID centre - MultiWiicopter pro-tip -> the prop requires the 2/4mm brass insert bush to centre on the 2.0mm MN1806 shaft - see photos
  6. Requires 1.5mm shaft height(thickness of these props).
  7. These are high quality props and very efficient - but you must adhere to safety warnings about props below - always.
  8. require NO balancing (we recommend to always check every prop and use 800 grit wet-n-dry to remove any sharp edges at the leading edge of the blades)

Includes

  • 2 props 5x3" as you see in Photo at right - 1* CW(L) and 1*CCW(R) - Props are marked CarbonBird & T-Motor - see photos
  • 2 x top plate Adapter for the MN1806 motors - the props have a 4mm centre hole - and outboard 12mm spaced mount points
  • 2 x brass inserts 2mm/4mm for use on a MN1806 motor ; 4 screws M2
  • each prop comes in a black velvet style bag 

 

Excludes

excludes motor MN1806 recommended
 
 
•Keep your PROPS OFF - not installed - until you are fully conversant/understand in full the functions of your Tx in full including TRAV (end Points), the arm and disarm procedures -  realise that for a noob skiping or out-of-order set-up steps or moving sticks, or even static -  PROPS may start at anytime without warning.  Never install props prior to calibration of the ESC and testing the gyro orientation, and arm/disarm testing of the board - YOU are responsible after you install props - make sure your actions and your Copter is safe before doing this.  PROPS can CUT ! take precautions !  Never fly closer than 30m to/from any person or pet
 
 
Question - Can it use this prop on other motors - ?
No - not really is base is narrow and designed for a 4mm shaft with 12mm holes only - as per MN1806

Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion