Below are the available bulk discount rates for each individual item when you purchase a certain amount
Now replaced by R15 motor HERE
Carbonbird Multicopter Motor 888kv for 4S - Reversed shaft (- collet is required) - YSiix or X8 co-axial
Reversed shaft motor 300w ( for 10 secs) specifically for multicopters with 330mm 20AWG silicon wires. The new version has improved CNC for a larger bearing and better cooling. also improved are the magnet spacing for better perfrmance and better balance. Multicopters control their flight by rapidly changing RPM every few milli-seconds - so the Carbonbird motor is light weight LOW-Inertia motor - and uses a light weight prop and prop adapter. These NEW CarbonBird Motors are custom wound with 26 turns of copper packed in tight to give a kva of 775ka. This makes them work VERY WELL on 4S 16.8v using a props from 11" to 9" such as 1060. Importantly - We also specified NMB miniature metric bearings for long lasting flight Ops (after many similar HK motos failed on us after a few short flights).
Power Tests & Recommended Props
Setup & Maintenance: