Loading... Please wait...
Click the image above to see a larger version
  • Image 1
  • Image 2
  • Image 3
  • Image 4

CarbonBird Gimbal-Motor 28.46 Pitch axis

$20.95
Shipping Weight:
105.00 Grams
Stock Remaining:
7


Product Description

This is the CarbonBird Gimbal-Motor 28•46 Pitch axis motor for the Scarab Gimbal black - spare/crash part.  It is shorter/lighter than the 32•55 roll version used for camera roll and has less torque than a 28.46 becuase it has to carry ONLY the inertia of the camera alone

Features:

  • Pitch axis 46g gimbal motor
  • Superior windings 90T 0.15mm wires
  • 300mm lead wires - black
  • Superior EZO™ bearings - Made in Japan
  • Light weight - LOW Inertia 
  • engine mounts 16mm/19mm spacing
  • Bell side mounting 12mm M2 - or 19mm M3
  • 3S-6S (12v-25v)

Dimensions

  • 28D x 32h  -see photo at right
  • 16mm and 19mm mounting holes
  • Colour - red/black

 

Power Tests & Recommended Props

  • internal resistance  18  Ohms
  • 90T 12Stator/14magnets


Includes as per photo
  • 1 x  CarbonBird Gimbal-Motor 28•46 Motor with 300mm wires 

 

Requires/Excludes

  • Requires Alexmos controller HERE
  • Excludes Button head bolts M3*5 for SCARAB cooler/mounts not included - available here
  • Requires Loctite - NOTE :screws are held by Loctite - this type of glue stops screws coming undone - Loctite glue is VERY hard at room temp or lower temps <35°c - to release any screw with loctite, simply heat it with your girl-friends hair dryer set to max heat (keep away from carbon)- heat the bolt so it is too hot to touch with your finger (85°C) - then the glue will become soft like butter and the M3 or M2 screw can be "released".  For M2 screws use the 1/16th Pro-tool here
Water damage - if submerged by accidental crash into salt water you may need to replace the 2 main bearings HERE


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion