this PARIS Sirius™ 4-Balls IMU vibration reduction mount kit is engineered by MultiWiicopter.com Australia. The specific purpose of this device is minimising vibration arriving at any IMU - We know from our R&D that this is the best approach to clean data - longer reliable flights with MultiWii sensors or with dji naza auto-pilots or the Air32 Naze if you have a twitch - and need it solved. If youre experiencing strange inflight "EVENTS" on your IMU - regarless of price or marketing hype - this device can help you. While LowPass filters can be used to remove/average ACC data - ok - but in reality the less vibration at the ACC/GYROs the better. This is especially important for the prevention of un-explained naza/wkm "Flip-Outs" or loss-of-control "events" 3-5 mins after take off (ACC saturation from vibration) or on distant FPV flights where youre not able to monitor the Pilot Warning LED used by dji. We recommend this IMU for the SCARAB HUNTER series with 14" props or bigger when combined with the PARIS Sirius™ AIR or the PARIS v5. Can also be used very effectively to mount a PARIS AIR suspended above the drive shaft for the brushless gimbal.
1 x High Quality CNC metal mount deck - Fits PARIS Sirius™ AIR ; PARIS Sirius IMU ; or NAZA ; or WookongM IMU
4 x PU GEL ball spheres - extremely resistant to vibration transfer
1 x 2.0mm CarbonFibre X-ring mount
For PARIS IMU - Use the VHB tape provided to stich the IMU down correctly (in the correct orientation) - be aware a loose or incorrectly orientated IMU is EXTREMELY HAZARDOUS - you must make sure that the IMU remains 100% attached at all times ! Never attach props until AFTER a full running systems check.
Do not modify - Modifaction of an IMU can result in severe issues
Do not combine with INCORRECTLY OVER-GAINED PIDS - PIDS which are set too high result in poor performance, shorter flight times and increased risk of IMU saturation or IMU resonance from noobs gains setting errors