Loading... Please wait...
Click the image above to see a larger version
  • Booms 12mm/9mm triple thick Carbon Scarab - 300mm uncut - set of 4 - 12mm OD Ø
  • Booms 12mm/9mm triple thick Carbon Scarab - 300mm uncut - set of 4

Booms 12mm/9mm triple thick Carbon Scarab - 300mm uncut - set of 4

$29.50
Shipping Weight:
140.00 Grams
Stock Remaining:
6


Product Description

These are CarbonBird® 300mm TRIPLE thickness (single engine) booms - these booms can handle the forces of a Scarab-power-Quad or an overclocked Vampire - and a give the strength you need to fly with confidence.  These booms can also be fitted to both the Stealth Scarabs Quad trainers (cut in half with diamond saw) - or to make an octa or Hexii X.  These Carbon booms are 5 layer 3K weave genuine 100% CF - these nothing like fake veneer booms from cloneKings who make fibeerglass look like carbon.  These are the REAL DEAL.

 

Carbon Scarab "Triple Thickness"booms set of 4  - Includes

  • Double thickness 6 layer, matt finish, 3K weave Full CF carbon booms
  • 12.00mm OD ; 9mm ID  (OD tolerance is 0.1mm)
  • 300mm length uncut
  • 22g each uncut (@ full 300mm legth if used this way)

 

Includes 

4 x 100% Genuine Carbon CarbonBird® -  12/9mm uncut - 300mm Length - must be cut to suit airframe - see below

 

Compatible Scarabs

  • QuadOcta built as flat 8 (8 booms with 8 engines)
    Hexii X
  • Vampire (if boosted/overclocked can be strengthened by these 12/9mm  ie bigger t-motors fitted after purchase) ; the standard vampire booms are 12/10
  • Stealth Armour
  • Stealth Reconn (you will need to remove the engine key mounts if choosing double thickness booms like these - a) becuase they will need to be sanded to  9mm to fit b) because the boom itself is structurally capable of opposing the cooler compression force)
 

NOTE: Because the inside diameter is 9mm they will not accept regular inserts (11mm) without sand down the inserts - also they CANNOT BE USED ON Y6 because 6 wires wont fit inside with the coaxiall mounts inserts - you would have to run your wires externally with these for a YSiix

NOTE: If you want these cut in half on our diamond saw for your Stealth - please make a note on the Order Comments box - cut size = 8*148mm booms  (148mm is a very cropped Quad size -> different from 170mm double thickness booms HERE)

NOTE : If you want them cut on our diamond saw to match your existing booms -> ie 260mm make a note on comments section of Shopping Cart

 

All crashes are avoidable through discipline and training.  Minimise your risk.


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!




Currency conversion